The Figaro is a variation on the inset method of installation in that it has a shallow smaller profile on the bottom of the sink and it is this that sits inside the cut-out in the worktop. Recommended cut-out size is 980 by 495mm. The construction is very solid with 1.2mm stainless stell encasing a wooden reinforcing frame. A different effect can be achieved compared to other inset sinks simply by lowering the top of your base unit so that the top of the Figaro is flush with the top of your worktop either side. A 65mm rear shelf can be set at the same height, raised or lowered according to your design taste. The Figaro has a brushed steel finish and is supplied with a 90mm pop-up strainer waste.

Overall size 1000mm x 535mm